design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. thick film chip resistors & 1 3 2 + 3 4 ( 5 & 6 : 7 + 8 9 10 11 7 12 thick film chip resistors product code size, power rating xgn : 01005 1gn : 0201 2ge : 0402 3ge : 0603 6ge : 0805 8ge : 1206 14 : 1210 12 : 1812 12z : 2010 1t : 2512 0.031 w 0.05 w 0.1 w 0.1 w 0.125 w 0.25 w 0.5 w 0.75 w 0.75 w 1 w power r. marking code y = nil marking value marking on black side no marking resistance tolerance code j 0 tolerance 5 % jumper the ?rst two digits are signi?cant ?gures of resistance and the third one denotes number of zeros following. decimal point is expressed by r as 4.7 = 4r7. jumper is expressed by r00. resistance value packaging methods code y u packaging type embossed carrier taping w4p1, 40,000 pcs. pressed carrier taping w8p2, 20,000 pcs. c pressed carrier taping 2 mm pitch, 15,000 pcs. erjxgn x y punched carrier taping 2 mm pitch, 20,000 pcs. u embossed carrier taping 4 mm pitch, 5,000 pcs. punched carrier taping 2 mm pitch, 10,000 pcs. erj2ge erj1gn embossed carrier taping 4 mm pitch, 4,000 pcs. erj1t erj14 erj12 erj12z type : inch v punched carrier taping 4 mm pitch, 5,000 pcs. erj3ge erj6ge erj8ge thick film chip resistors 01005, 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512 type: erj xg, 1g, 2g, 3g, 6g, 8g, 14, 12, 12z, 1t features small size and lightweight high reliability metal glaze thick ? lm resistive el ement and three layers of electrodes compatible with placement machines taping packaging available suitable for both re? ow and ? ow sol der ing reference standards iec 60115-8, jis c 5201-8, eiaj rc-2134b aec-q200 quali? ed (exemption erjxg) rohs compliant explanation of part numbers erjxgn, 1gn, 2ge, 3ge, 6ge, 8ge, 14, 12, 12z, 1t series, 5 % type ? when omitted, the rest of the p/n factors shall be moved up respectively. (only xgn, 1gn, 2ge type) packaging methods, land pattern, soldering conditions and safety precautions please see data files feb. 2014 03 3
thick film chip resistors design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. protective coating alumina substrate electrode (inner) electrode (between) thick ?lm resistive element electrode (outer) C40 C20 0 20 40 60 80 100 120 140 160 0 180 C60 155 c 70 c ambient temperature (c) 20 40 60 80 100 rated load (%) C55 c 2g, 3g, 6g, 8g, 14, 12, 12z, 1t xg, 1g 125 c a b t w l construction dimensions in mm (not to scale) type (inch size) dimensions (mm) mass (weight) (g/1000 pcs.) lwa b t erjxg (01005) 0.40 0.02 0.20 0.02 0.10 0.03 0.10 0.03 0.13 0.02 0.04 erj1g (0201) 0.60 0.03 0.30 0.03 0.10 0.05 0.15 0.05 0.23 0.03 0.15 erj2g (0402) 1.00 0.05 0.50 0.05 0.20 0.10 0.25 0.05 0.35 0.05 0.8 erj3g (0603) 1.60 0.15 0.80 +0.15 0.30 0.20 0.30 0.15 0.45 0.10 2 erj6g (0805) 2.00 0.20 1.25 0.10 0.40 0.20 0.40 0.20 0.60 0.10 4 erj8g (1206) 3.20 +0.05 1.60 +0.05 0.50 0.20 0.50 0.20 0.60 0.10 10 erj14 (1210) 3.20 0.20 2.50 0.20 0.50 0.20 0.50 0.20 0.60 0.10 16 erj12 (1812) 4.50 0.20 3.20 0.20 0.50 0.20 0.50 0.20 0.60 0.10 27 erj12z (2010) 5.00 0.20 2.50 0.20 0.60 0.20 0.60 0.20 0.60 0.10 27 erj1t (2512) 6.40 0.20 3.20 0.20 0.65 0.20 0.60 0.20 0.60 0.10 45 C0.05 C0.15 C0.20 type (inch size) power rating at 70 c (w) limiting element voltage (1) (v) maximum overload voltage (2) (v) resistance tolerance (%) resistance range ( ) t. c.r. ( 10 C6 /c) category temperature range (c) erjxg (01005) 0.031 15 30 5 4.7 to 1 m (e24) <10 : C100 to +600 10 to 100 : 300 100 < : 200 C55 to +125 erj1g (0201) 0.05 25 50 5 1 to 10 m (e24) <10 : C100 to +600 10 to 1 m : 200 1 m <: C400 to +150 C55 to +125 erj2g (0402) 0.1 50 100 5 1 to 10 m (e24) C55 to +155 erj3g (0603) 0.1 75 150 5 1 to 10 m (e24) C55 to +155 erj6g (0805) 0.125 150 200 5 1 to 10 m (e24) C55 to +155 erj8g (1206) 0.25 200 400 5 1 to 10 m (e24) C55 to +155 erj14 (1210) 0.5 200 400 5 1 to 10 m (e24) C55 to +155 erj12 (1812) 0.75 200 500 5 1 to 10 m (e24) C55 to +155 erj12z (2010) 0.75 200 500 5 1 to 10 m (e24) C55 to +155 erj1t (2512) 1 200 500 5 1 to 1 m (e24) C55 to +155 type (inch size) rated current (a) maximum over load current (a) erjxg (01005) 0.5 1 erj1g (0201) er j2g (0402) 12 erj3g (0603) er j6g (0805) 24 erj8g (1206) er j14 (1210) erj12 (1812) erj12z (2010) erj1t (2512) power derating curve for resistors operated in ambient temperatures above 70 c, power rating shall be derated in accordance with the ? gure below. (1) rated continuous working voltage (rcwv) shall be de ter mined from rcwv= power rating re sis tance values, or limiting element voltage list ed above, whichever less. (2) overload (short-time overload) test voltage (sotv) shall be de ter mined from sotv=2.5 (only erj2g=2.0) power rating or max. over load volt age list ed above which ev er less. ratings feb. 2014 03 4
|
